Call: 262.284.9431
Foundry Equipment > Molten Metal Handling / Foundry Ladles > Series 1170 Precision Bottom Pour Ladles  

Series 1170 Precision Bottom Pour Ladles



Bottom pour ladles provide slag-free metal and are applicable for pouring both light and heavy work.

Design of the bottom-pour, rectangular, slide mechanism insures positive control over the flow of metal. With a housing, enclosing the machined rack and pinion, all moving parts are protected from foundry dirt, slag and sparks which tend to gum-up ordinary; open slides. The entire assembly remains clean. Manual fixtures, incorporated in the design, lock both the gooseneck and stop-per rod in their accurately, adjusted position. The entire mechanism is hinge mounted to the ladle bowl to permit ready adjustment of the stopper rod in its vertical alignment to permit ready adjustment of the stopper rod in its vertical alignment.

Slides can be furnished to release metal when lever is either raised or depressed. The dual motion of the lever applies whether lever is mounted to the right or the left of the ladle centerline. The broad flexibility in control over metal flow meets a wide range of conditions in varying foundry practices.

Disengagement of the bottom pour unit for maintenance purposes, is easily accomplished by removing the hinge pin.

Ladle bowls are well vented on the sides and bottom, to insure fast, safe drying of the linings.

Trunnion locations of geared, bottom pour ladles are engineered for correct balance. When ordering, specify linings to be used.






Specifications

Size

26 to 80 in

Capacity

1,000 to 50,000 lb


 DOWNLOADS 

Inspection PDF with Inspection_6-14
(PDF, 193KB)

Series 1170 Precision Bottom Pour Ladles with Series-1170-6-14
(PDF, 832KB)