Call: 262.284.9431
Foundry Equipment > Molten Metal Handling / Foundry Ladles > Series 1080 Geared, Covered, Tapered Ladles.  

Series 1080 Geared, Covered, Tapered Ladles.



Geared, covered tapered ladle with square bail.

Modern series 1080 ladles with their worm and worm wheel gearings reduce the operator's work to a minimum.

Further increasing the highly efficient, high production capacity of the ladles described and illustrated here are MODERN, detachable, pull-back covers. The small, additional investment inladles of covered design quickly is liquidated by the improved quality of hotter metal poured.

Covers, which help to deflect heat away from the ladle operators, readily are detached to ease the task of lining both covers and ladle bowls.

Covers are shipped fully lined.

Tapered bowl design affords maximum clearance between ladle and mold where molds are set-up closely together. Also the entire lining is readily removed from a tapered bowl.

All-welded bowl construction eliminates all possible dead-weight while adding great strength.

Ladle-tilting torque is effectively transmitted from gearing to trunnion-stubs and shank ring to minimize bowl distortion and lengthens ladle life.






Specifications

Size

15 to 37 in

Capacity

300 to 4,000 lb

Detailed Features

  1. Trunnion housings fully enclose the anti-friction trunnion bearings.
  2. Gear housings are supported on both sides of the worm wheel,relieveing the gearing of all weight bearings.
  3. Hand-wheel shaft operates on anti-friction bearings.
  4. Sizes starting at 15” and 300 lbs iron.

Notes

Straight sided ladle bowls are also available, offering slightly higher capacities over tapered designs without changing the overall dimensions of the ladle shell.


 DOWNLOADS 

Inspection PDF with Inspection_6-14
(PDF, 193KB)

Series 1080 Covered, Tapered Ladles with Series-1080-6-14
(PDF, 846KB)